Effecting the addition of the Plastic waste and Rubber on the constructions materials properties

International Conference on Materials Engineering and Science

Eweed, Khalid Mershed^1 ; Ebrahim, Yasir Khalil^1 ; Ali, Rusel Sultan^1

Material Department, Collage of Engineering, Mustansiriyah University, Iraq^1

关键词: Mortar properties;    New cements;    Plastic wastes;    Styrene butadiene rubber;    Ultrasonic pulse velocity;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/454/1/012151/pdf
DOI  :  10.1088/1757-899X/454/1/012151

来源: IOP

【 摘 要 】

Effecting addition certain rubber is Styrene Butadiene Rubber (SBR) has been selected for study and plastic waste used in this work is recycled high density polyethylene on the cement ratio was kept constant at 50%. Three sand / cement ratios of (1:3) were adopted. Rubber / cement ratios were varied as 5%, 10%, 15% and 20%.The effect of (SBR, PE) on OPC was studied and compared with control mortar properties (consistency, flow, density, hardness, compressive strength, water absorption, SEM, Ultrasonic Pulse Velocity and XRD). At (7, 14, 28) days. The resulting of the test indicated that, there is probability to yield plastic new cement from PE plus OPC by (5, 10, 15, 20) %. The compressive strength amounts of all plastic waste mortar mixture tends to digress under the amounts for the mortar reference mix with increasing the plastic proportion of waste of whole ages. But workability improve their density was decreased this leading to produce materials of lightweight. The compressive strength value of SBR tends to less but SBR had improved to produce mortar modified by mortar.