Monitoring system design of the public energy-saving charging device

2018 3rd International Conference on Insulating Materials, Material Application and Electrical Engineering

材料科学;无线电电子学;电工学

Zhou, Bin^1 ; Cheng, Jinjun^2 ; Jin, Hengrui^1

Lanzhou Institute of Technology, Gansu, China^1

Lanzhou Haimo Technologies Co., Ltd., Gansu, China^2

关键词: Charging device;    Charging systems;    Detection modules;    Electric energies;    Low power state;    Monitoring system;    Real time monitoring system;    Storage battery;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/452/4/042115/pdf
DOI  :  10.1088/1757-899X/452/4/042115

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Aiming at the problem that when people go out and the mobile phone is dead, but there is no place to charge for phone, this thesis presents a monitoring system of energy-saving charging device at Bus Station,There are two mainly parts in this design, one is the use of solar panels installed on the roof of the Bus Station generates electricity, Electricity can be output to the storage battery through the automatic voltage drop module [1-2] in the form of electric current. The stored electric energy can be easily recharged by the mobile phone charging plug, It can facilitate the user that is out or his/her mobile phone is in the low-power state to replenish the power in time. The other part is the real-time monitoring System, when the control center sends a request to the detection module in order to uploading voltage and position data instructions through the PC or cell phone, the detection module can reply through the SIM800C SMS or through the serial port to the PC upload monitoring data, the control center staff can timely understand the charging system's faulty and can locate the point of failure through the return of information, It is convenient for technicians to make accurate maintenance.