The Effect of Pretreatment Method on the Decorative Effect of the Wax Furniture

2018 3rd International Conference on Insulating Materials, Material Application and Electrical Engineering

材料科学;无线电电子学;电工学

Dao, Thanh Giang^1,2 ; Nguyen, Tat Thang^1,3 ; Song, Xiaoxue^1 ; Wang, Xuting^1 ; Song, Kuian^1

Key Laboratory of Bio-based Material Science and Technology, Ministry of Education, Northeast Forestry University, Harbin

150040, China^1

Northeastern College of Agriculture and Forestry, Quang Ninh, Viet Nam^2

Vietnam National University of Forestry, Ha Noi, Viet Nam^3

关键词: Coating surface;    Comparative analysis;    Decorative effects;    Hydrophobic coatings;    Hydrothermal methods;    Hydrothermal pretreatment;    Pretreatment methods;    Surface hardness;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/452/2/022009/pdf
DOI  :  10.1088/1757-899X/452/2/022009

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

In this study, the authors used hot wax selected from beeswax and insect wax. These two types of wax are blended with a 1: 1 ratio. Then use three methods of surface treatment before wax coating on the Ash wood surface including hydrothermal method, compound lye method, and plasma method. Through comparative analysis of 4 properties: color, adhesion, hardness and surface properties of the hydrophobic coating. The results show that the hot wax coating on the ash surface can maintain the original color of the wood. Comparison of three methods of wood treatment shows that: plasma method for the coating surface has the best adhesion, hydrothermal method for best surface hardness of the coating, and the hydrophobicity of hot wax after hydrothermal pretreatment is the best.