Research on 3D Printing Process of Metal Powder Based on UV Curing

2018 3rd International Conference on Insulating Materials, Material Application and Electrical Engineering

材料科学;无线电电子学;电工学

Liu, Xun^1 ; Li, Sixiang^1 ; Yang, Jianfei^1,2 ; Gao, Yu^1 ; Dou, Yiping^1

School of Electrical and Automation Engineering, Nanjing Normal University, Nanjing, China^1

Nanjing Normal University Changzhou Institute of Innovation and Development, Changzhou, China^2

关键词: 3D printing process;    Coating thickness;    Forming quality;    Influence of process parameters;    Ink-jet printing technologies;    Molding process;    Nozzle temperature;    Process parameters;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/452/2/022004/pdf
DOI  :  10.1088/1757-899X/452/2/022004

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

In this paper, the 3D printing process of metal powder based on digital micro jet was studied. This process used a UV resin with a fast curing speed and high strength as a binder to realize rapid metal powder molding. The influence of process parameters such as nozzle temperature, print pitch, powder coating thickness and printing speed on the forming quality of metal powders was analysed. The adhesion of UV resin and metal powder was obtained by electron microscope. By measuring the density of the model and combined with the molding effect of the model surface, the better process parameters were determined. The results showed that under these process parameters, the bonding effect of UV resin and metal powder can be improved, and the error of molding process can be reduced. It has some theoretical and experimental significance for metal ink-jet printing technology.