Morphology of multilayer metal-carbon coatings with different arrangements of functional layers

Scanning Probe Microscopy 2018

Lapitskaya, V.A.^1 ; Kuznetsova, T.A.^1 ; Chizhik, S.A.^1 ; Rogachev, A.A.^2

A v Luikov Heat and Mass Transfer Institute of NAS Belarus, Minsk

220072, Belarus^1

Francisk Skorina Gomel State University, Gomel

246019, Belarus^2

关键词: Adhesion forces;    Air atmosphere;    Arc-discharge method;    Carbon coating;    Functional layer;    Multi-layer metals;    Properties of coatings;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/443/1/012020/pdf
DOI  :  10.1088/1757-899X/443/1/012020

来源: IOP

【 摘 要 】

The surface morphology of multilayer metal-carbon coatings before and after annealing in the air atmosphere at temperature of 350?C for 60 minutes was investigated by atomic force microscopy. The coatings were obtained by the arc discharge method. The surface morphology, roughness, and adhesion forces largely depend on the type of deposit layers and their sequence (architecture). Annealing in air at temperature of 350?C differently affects the properties of coatings of different designs.