Research Of Mixer Rotors Speed On Mixing Process Of Short Fiber-rubber Composites

2018 International Conference on Advanced Electronic Materials, Computers and Materials Engineering

材料科学;无线电电子学;计算机科学

Zhang, Dewei^1,2 ; Shen, Bo^1,2 ; Li, Shaoming^1,2 ; Wang, Chuansheng^1,2

Shandong Provincial Key Laboratory of Polymer Material Advanced Manufacturing Technology, Qingdao, Shandong

266061, China^1

College of Electromechanical Engineering, Qingdao University of Science and Technology, Qingdao, Shandong

266061, China^2

关键词: Mixing process;    Physical and mechanical properties;    Rotor speed;    Short Fiber;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/439/4/042075/pdf
DOI  :  10.1088/1757-899X/439/4/042075

来源: IOP

【 摘 要 】

Mixer rotor speed is one of the important factors which effects the mixing process and mixer rotor speed of SFRC greatly. The effects of different mixer rotor speed on mixing process of SFRC have been researched by experiments. In the paper, the mixer rotor speed was changed from 50rpm to 80rpm respectively. And also the addition of short fibers was about 0phr∼6phr. The experimental results indicated that SFRC had better physical and mechanical properties as mixer rotor speed was about 70rpm, and the addition of short fibers was about 3phr.