Preparation of chitosan composite film using activated carbon from oil palm empty fruit bunch for Cd2+ removal from water

3rd Annual Applied Science and Engineering Conference

工业技术;自然科学

Rahmi^1

Department of Chemistry, Syiah Kuala University, Banda Aceh

23111, Indonesia^1

关键词: Adsorption capacities;    Adsorption studies;    Chitosan composites;    Fourier transform infrared;    Initial concentration;    Langmuir and Freundlich isotherm models;    Oil palm empty fruit bunch;    Pyrolysis process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/434/1/012092/pdf
DOI  :  10.1088/1757-899X/434/1/012092

来源: IOP

【 摘 要 】

Preparation of chitosan composite film using activated carbon had been successfully conducted. Activated carbon was produced by pyrolysis process of oil palm empty fruit bunch. The chitosan composite films were prepared by varying activated carbon content. The obtained chitosan composite films were charactherized by tensile test, Fourier Transform Infrared (FTIR), X-Ray Diffraction (XRD) and Scanning Electon Microscope (SEM). Tensile test results showed content of activated carbon influenced the tensile strength of chitosan film. Adsorption study was conducted with various contact time, pH and initial concentration of Cd2+. Langmuir and Freundlich isotherm models were used to describe the mechanism of Cd2+ adsorption by chitosan composite film. The maximum adsorption capacity based on Langmuir isoterm model (Q) was 333.33 mg/g. Regeneration study showed the chitosan composite film exhibited higher performance than pure chitosan film.