Design Measuring Instrument Dust Based Internet of Things

3rd Annual Applied Science and Engineering Conference

工业技术;自然科学

Syahrorini, S.^1 ; Hadidjaja, D.^1 ; Ahfas, A.^1 ; Rahmansyah, A.^2 ; Pramono, S.H.^2

Study Program Electro Engineering, Universitas Muhammadiyah Sidoarjo, Jawa Timur, Indonesia^1

Faculty of Engineering, Brawijaya University, Jawa Timur, Indonesia^2

关键词: Data measurements;    Data storage;    Dust concentrations;    Four-point;    Front pages;    In-buildings;    Measuring device;    Measuring instruments;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/434/1/012218/pdf
DOI  :  10.1088/1757-899X/434/1/012218

来源: IOP

【 摘 要 】

Dust is one of the causes of decreased air quality, for it needs a remote-controlled dust gauge and bias store data measurement results. During this measuring device there is no data storage facility of measurement results, for the need for storage of data measurement results. Storage of measured data using internet of things displayed through PC. So no longer need to dating record to the measurement of dust, simply see the results of measurements through the PC, which can be seen bias measurements an minutes. In building this dust meter using NODEMCU, sensor type gp2y1010au0f sharp, step down, 16x2 LCD. Measurement of dust is done at campus area 2 at four point location that is canteen, entrance of campus 2, electro laboratory warehouse and front page of campus 2. Measurement of dust conducted on 22 and 23 March 2018 at 12:51-12:55, 13:13-13:17, 06:58-07:02, 07:43-07:47, 05:51-05:55, 06:01-06:07, 00:00-00:04, and 00:42-00:46. The result of measurement of dust at campus area 2 at the entrance of the parking at 13:13-13:17 dust concentration tends to rise from 0.1-0.3 when the students come home. The canteen area at 12:15-12:55 concentration of dust tends to rise, that is 0.08-0.1 mg/m3 when the student breaks college.