Effect of hot rolling conditions on the nitride precipitation process in low carbon steel strips

11th Hungarian Conference on Materials Science

Mucsi, A.^1

Óbuda University, Donát Bánki Faculty of Mechanical and Safety Engineering, Budapest, Hungary^1

关键词: Annealed state;    Coiling temperature;    Cooling methods;    Hot rolling condition;    Low carbon steel strips;    Nitride precipitations;    Nitrogen content;    Run out tables;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/426/1/012036/pdf
DOI  :  10.1088/1757-899X/426/1/012036

来源: IOP

【 摘 要 】

The nitride precipitation process plays an important role in the final mechanical and aging behaviour of low carbon steels in hot rolled state as well as in cold rolled and annealed state. The nitride precipitation process is investigated in an indirect manner: instead of measuring the amount of nitrogen compounds, the free nitrogen content of the samples was measured using a special thermomechanical treatment and a thermoelectric power tester. It was found, that the free nitrogen content in a steel strip strongly depends on three main factors: on the position in strip transverse direction, on the coiling temperature and on the cooling method at the run-out table of the hot rolling mill.