Electromagnetic flow rate measurement in molten tin circulating in a closed-loop test system

9th International Symposium on Electromagnetic Processing of Materials

材料科学;物理学

Lyu, Z.^1 ; Karcher, Ch.^1 ; Kolesnikov, Y.^1 ; Boeck, Th.^1

Institute of Thermodynamics and Fluid Mechanics, Technische Universität Ilmenau, P.O. Box 100565, Ilmenau

D-98684, Germany^1

关键词: Applied magnetic fields;    Electric potential difference;    Electromagnetic methods;    Flow rate measurements;    Laboratory conditions;    Lorentz force flowmeters;    Non-contact and non-invasive;    Wall potential;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/424/1/012084/pdf
DOI  :  10.1088/1757-899X/424/1/012084

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Flow rate measurement in molten metals at elevated temperatures is still a challenging task in metallurgie application. Due to the opaqueness and chemical aggressiveness of such melts, non-contact and non-invasive electromagnetic methods are of special interest. In order to develop and to test such methods under controllable laboratory conditions, during the last years at TU Ilmenau we have built up and instrumented the test facility TINTELO (tin test loop). TINTELO is a closed loop facility made of stainless steel in which molten tin at a temperature up to 350°C circulates in the horizontal plane. The flow is driven by an electromagnetic pump based on rotating permanent magnets. The rotation frequency of the pump can be fixed at up to 60 Hz providing a mass flow rate of 17.5 kg/s which corresponds to a Reynolds number of Re = 2•105. TINTELO is instrumented with both a Lorentz force flowmeter and a wall potential flowmeter. The Lorentz force flowmeter measures the force which the electrical conducting moving molten tin exerts on a system of permanent magnets arranged outside of the loop. This force is the counter force to the well-known braking Lorentz force that is proportional to the melt flow rate. Moreover, the wall potential flowmeter records the electric potential difference between two electrodes inserted in the conducting wall of the loop. This potential difference, induced by the moving melt when interacting with an externally applied magnetic field, is proportional to melt velocity. In this paper we present the design and the instrumentation of TINTELO, the calibration methods for the used flowmeters and first results of the flow rate test measurements.