Design of shell and tube equipment with one pass shell and two pass tube as water heater

2nd Nommensen International Conference on Technology and Engineering

Napitupulu, Farel H.^1 ; Sitepu, Tekad^1 ; Sihombing, Ferry^1

Mechanical Engineering Department, Faculty of Engineering, Universitas Sumatera Utara, Jl. Almamater, Kampus USU, Medan

20155, Indonesia^1

关键词: Heat energy;    Hot air;    Hot water;    One-pass;    Shell-and-tube;    Total length;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/420/1/012016/pdf
DOI  :  10.1088/1757-899X/420/1/012016

来源: IOP

【 摘 要 】

Directly discharged hot water will not be a bad effect on the air. In this research to make a tool of heat designer that utilize heat energy from waste of hot air of fertilizer factory which function to heat air and will be used as hot water in residential bathing place of fertilizer factory employee. By utilizing the heat energy from the hot water waste then the temperature of this hot water will also fall and then can enter the river without endangering the ecosystem in the river. In summary, there is a 1.64 m long heat exchanger, 0.48 m width and 2.1 m height. The total length of the pipe in the heat exchanger is 2.7 m in diameter 13 mm, and the shell is 1.35 m long and 70mm in diameter, volume on the tank this exchanger is 27 Liters.