CoCr Based Alloys in Current Dental Prosthetic Applications

7th International Conference on Advanced Materials and Structures

Reclaru, L.^1 ; Ardelean, L.C.^2

Corrosion and Biocompatibility Department, VVSA, Branch of Richemont International SA Varinor Innovation, Switzerland^1

Victor Babes University of Medicine and Pharmacy Timisoara, Faculty of Dental Medicine, Dept 1, Technology of Materials and Devices in Dental Medicine, 9 Revolutiei 1989 Bd., Timisoara, Romania^2

关键词: 3-D printing;    Chemical compositions;    Co-Cr alloys;    Direct metal laser sintering;    Manufacturing technologies;    Milling process;    Selective laser melting;    Selective laser sintering;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/416/1/012039/pdf
DOI  :  10.1088/1757-899X/416/1/012039

来源: IOP

【 摘 要 】

CoCr alloys are traditionally manufactured by casting, but nowadays alternatives such as CAD/CAM milling or 3D Printing Technologies (Direct metal laser sintering (DMLS), Selective laser sintering (SLS), Selective laser melting (SLM), Electron beam melting (EBM)) are available. CoCr blanks to be milled in the green body state (unsintered metal powder held together by a binder) and then densely sintered try to overcome the hardness of the alloy and to ease the milling process. The aim of this paper is to compare the quality of prosthetic pieces manufactured by CAD/CAM milling, CAD/CAM sintering and Selective laser sintering. Because the chemical composition of the CoCr alloys used is comparable, differences in quality of the prosthetic pieces are the result of the manufacturing technology. In terms of structure and corrosion resistance, the CAD/CAM milling sample proved to be the best choice and the SLS sample the worst.