The microstructure study of CJP products

International Scientific-technical Conference on Innovative Engineering Technologies, Equipment and Materials 2017

工业技术;机械制造;材料科学

Kashapov, L.N.^1 ; Kashapov, R.N.^1,2,3 ; Kashapov, N.F.^1 ; Farrahov, R.R.^1

Engineering Institute, Kazan Federal University, Kazan

420008, Russia^1

Laboratory of Radiation Physics, Kazan Physical-Technical Institute, Kazan Scientific Center, Russian Academy of Sciences, Kazan

420029, Russia^2

Kazan State Medical University, Kazan

420012, Russia^3

关键词: IR spectrum;    Is researches;    Printing technologies;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/412/1/012086/pdf
DOI  :  10.1088/1757-899X/412/1/012086

来源: IOP

【 摘 要 】

The aim of work is research the microstructure of the products obtained in the ProJet 160 by ColorJet Printing technology. An IR spectrometer and a scanning electron microscope were used to analyze the structure. Analysis of IR spectra showed that when the gluing component was added, redistribution of the intensities of the absorption bands in the 3600-3500 cm-1 and 1130-1080 cm-1 region and the appearance of new lanes in the 3403 cm-1 and 1685 cm-1 region were observed. This indicates the phase transformation of the gypsum component under the action of water.