The analysis of the effect of iron-ore raw material composition on blast-furnace smelting parameters by the mathematical model method

20th International Scientific and Research Conference "Metallurgy: Technologies, Innovation, Quality. Metallurgy-2017"

Pavlov, A.V.^1 ; Onorin, O.P.^2 ; Spirin, N.A.^2 ; Polinov, A.A.^1 ; Lavrov, V.V.^2 ; Gurin, I.A.^2

Magnitogorsk Iron and Steel Works, 93 Kirov street, Magnitogorsk

455000, Russia^1

Ural Federal University N.a. the First President of Russia B.N. Yeltsin, 51 Lenina ave, Ekaterinburg

620075, Russia^2

关键词: Blast furnace operation;    Blast furnace process;    Blast-furnace smelting;    Calculation results;    Developed model;    Model-based OPC;    Non-fluxed pellets;    Raw material composition;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/411/1/012057/pdf
DOI  :  10.1088/1757-899X/411/1/012057

来源: IOP

【 摘 要 】

The paper considers capabilities of the developed model-based decision support system (URFU-MMK model of the blast-furnace process) for diagnostics of operation and prediction of production situations at blast furnaces. It presents some results of practical application of the developed system and it also gives recommendations for certain aspects of process task solving on the basis of the model-based decision support system. It presents calculation results of blast furnace operation with a high portion of non-fluxed pellets from Sokolovsk-Sarbay Ore Mining and Processing Group in burden of MMK's blast furnaces with different content of local sinter. It shows that with a higher portion of non-fluxed pellets (up to 60%) in the charged burden it is necessary to charge limestone in the furnace to achieve the required basicity of blast-furnace slag. In order to reduce the amount of crude limestone to be charged, it is necessary to produce sinter of high basicity. As far as the portion of pellets in the charged burden increases, concentration of magnesia in blast-furnace slag decreases. To increase concentration of magnesium oxides in slag, it is efficient to use combined basic flux consisting of 70% normal limestone and 30% dolomite limestone.