Heat treatment of steel 30KhGSA on the specialized equipment

20th International Scientific and Research Conference "Metallurgy: Technologies, Innovation, Quality. Metallurgy-2017"

Ivanov, A.A.^1 ; Oskolkova, T.N.^1

Siberian State Industrial University, 42 Kirova street, Novokuznetsk

654007, Russia^1

关键词: Manufactured products;    Serial products;    Specialized equipment;    Technological operations;    Vacuum heat treatment;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/411/1/012034/pdf
DOI  :  10.1088/1757-899X/411/1/012034

来源: IOP

【 摘 要 】

This article presents the results of the developed technology for the production of the part "striker" made of steel 30KhGSA with the use of vacuum heat treatment. It was established that application of vacuum heat treatment for critical parts can significantly increase the percentage of yield of good products, reduce the number of technological operations by 2.5 times and the cost of manufactured products by 30%, and also obtain high repeatability of the result, which is an important indicator in the production of serial products .