Mathematical modelling and performance analysis of single pass flat plate solar collector

1st International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing

机械制造;材料科学

Irshad, Mohd^1 ; Yadav, Anshul^1 ; Singh, Rajnish^1 ; Kumar, Anil^1

Department of Mechanical Engineering, Kamla Nehru Institute of Technology, Sultanpur

228118, India^1

关键词: Absorber plates;    Flat-plate solar collectors;    Heat loss coefficients;    Modelling and performance analysis;    Optical efficiency;    Outlet temperature;    Solar air heater;    Solar flat plate;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/404/1/012051/pdf
DOI  :  10.1088/1757-899X/404/1/012051

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Various type of solar collectors has already been designed and developed. A solar flat plate collector is used to raise the temperature of the passing fluid (air/water) from it. In the present work, a single cover flat plate solar collector was fabricated using the standard methodology proposed by other researches for the construction of conventional solar air heaters. The variation of the solar radiation, the air outlet temperature and the variation of absorber plate temperature throughout the day were recorded. The efficiency, effective optical efficiency, and the effective heat loss coefficient of single cover flat plate solar collector were calculated. The effect of wind velocity on collector's performance was also studied. The effective optical efficiency of the fabricated collector, effective heat loss coefficient, and the efficiency of the collector was found to be 72.7 %, 8.422 W m-2 K-1, 36.73 % respectively.