Part cost estimation in injection moulding

6th ModTech International Conference - Modern Technologies in Industrial Engineering

Turc, C.G.^1 ; Cruu, C.^2 ; Belgiu, G.^3

Department of Materials and Manufacturing Engineering, Politehnica University of Timioara, Bv. Mihai Viteazu, No. 1, Timioara

300222, Romania^1

Department of Manufacturing Engineering, Gheorghe Asachi Technical University of Iai, Bv. D. Mangeron, No. 59A, Iai

700050, Romania^2

Department of Management, Politehnica University of Timioara, Bv. Mihai Viteazu, No. 1, Timioara

300222, Romania^3

关键词: Material cost;    Mechanical loads;    Operation cost;    Part cost;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/400/4/042058/pdf
DOI  :  10.1088/1757-899X/400/4/042058

来源: IOP

【 摘 要 】

The part cost optimization is one of the major problems in plastics industry. The designers must take into account a lot of aspects regarding the functional role of the part, the mechanical loads, and least but not last, the part cost. The part cost depends on the mould cost, the equipment operation cost and the material cost. The paper presents a methodology to estimate the part cost, focusing on the equipment operation cost. In addition, a spreadsheet is provided in order to estimate the equipment operation cost.