Approach by the response surface method to determine the cutting cemperature of AISI 1060 steel

6th ModTech International Conference - Modern Technologies in Industrial Engineering

Abdelkrim, M.^1 ; Belloufi, A.^1 ; Rezgui, I.^1 ; Brabie, G.^2

Département de Génie Mécanique, Faculté des Sciences Appliquées, Université Kasdi Merbah, Ouargla

30000, Algeria^1

Vasile Alecsandri University of Bacau, Calea Marasesti, Bacau

600115, Romania^2

关键词: Cutting parameters;    Cutting speed;    Cutting temperature;    Depth of cut;    Error percentage;    Factors of production;    Response surface method;    Surface response method;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/400/2/022001/pdf
DOI  :  10.1088/1757-899X/400/2/022001

来源: IOP

【 摘 要 】

The surface response method is widely used in many sectors of the industry, this method is a set of statistical and mathematical techniques used to minimize or maximize the factors of production by optimizing inputs factors. The use of this method helps to improve the quality of the products and processes while reducing the time and cost of producing the products. Our goal is to use this method to reduce the number of experiments and analyse the interaction between the cutting parameters (cutting speed, feed rate and depth of cut) and to predict the response (cutting temperature) during the machinability of the AISI 1060 steel, by turning. The results found the predicted values obtained by the mathematical model show good agreement with the experimental results, the error percentage of the numerical models and the accuracy were 5.15% and 94.85% respectively.