Simulation and Control of MPPT Based Hybrid System with Boost Converter

International Conference on Recent Advancements and Effectual Researches in Engineering Science and Technology

Barsana Banu, J.^1 ; Balasingh Moses, M.^1 ; Rajarajacholan, S.^2

University College of Engineering, BIT Campus, Tiruchirappalli, Tamilnadu, India^1

University College of Engineering, Anna University, Ariyalur Campus, Tamilnadu, India^2

关键词: Hybrid power systems;    MATLAB /simulink;    Maximum power point;    Permanent Magnet Synchronous generator (PMSG);    Perturb and observe;    Resistive loads;    Solar irradiation;    Standalone applications;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/396/1/012046/pdf
DOI  :  10.1088/1757-899X/396/1/012046

来源: IOP

【 摘 要 】

A new topology of the hybrid (solar plus wind) power system with enhanced boost converter is proposed in this paper for standalone applications. The proposed hybrid power system comprises of solar panel and permanent magnet synchronous generator (PMSG) based wind turbine followed by rectifier and enhanced boost converter with resistive load. These natural sources deliver the load independently or concurrently depending on the requirement and accessibility of sources. The efficiency of the hybrid power system is increased by maximum power point operation. The most usually used Perturb and Observe (P&O) MPPT technique extracts the maximum power at the certain point. The complete structure was modelled and simulated in MATLAB/SIMULINK package with variable solar irradiation and wind speed. The outcomes obtainable demonstrate the confirmation of the projected hybrid power system.