Heat distribution in the deep drawing device components working by high temperatures

10th International Symposium Machine and Industrial Design in Mechanical Engineering

工业技术;机械制造

Tropp, M.^1 ; Brumerík, F.^1 ; Šteininger, J.^1 ; Weis, P.^1 ; Glowacz, A.^2

Univerzity of ilina, Faculty of Mechanical Engineering, Department of Design and Mechanical Elements, Univerzitná 1, ilina

010 26, Slovakia^1

AGHUniversity of Science and Technology, Faculty of Electrical Engineering Automatics, Computer Science and Biomedical Engineering, Department of Automatic Control and Robotics, Al. A. Mickiewicza 30, Kraków

30-059, Poland^2

关键词: Extreme conditions;    Heat distribution;    High temperature;    In-vacuum;    Molybdenum sheet;    Transient thermal simulation;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/393/1/012075/pdf
DOI  :  10.1088/1757-899X/393/1/012075

学科分类：工业工程学

来源: IOP

【 摘 要 】

The subject of the article is a simulation of heat affected components of a device for deep drawing by extreme conditions in vacuum by high temperatures required for forming of crystallization containers made from thin molybdenum sheets. The simulation is focused on the distribution of heat in particular components in relation with their shape. There are presented the design of working components and the boundary conditions of transient thermal simulations with the results.