Analysis of needs of the processing industry in Montenegro for establishment of the Laboratory for industrial design

10th International Symposium Machine and Industrial Design in Mechanical Engineering

工业技术;机械制造

Tomovi, R.^1 ; Bulatovi, R.^1 ; Jovanovi, J.^1 ; Mijanovi Marku, M.^1 ; Vujovi, A.^1 ; Mumovi, M.^1 ; Tomovi, A.^1 ; Vujoevi, V.^1

University of Montenegro, Faculty of Mechanical Engineering, Bulevar Dorda Vaingtona, Podgorica

81000, Montenegro^1

关键词: Delphi method;    Feasibility studies;    Processing industry;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/393/1/012113/pdf
DOI  :  10.1088/1757-899X/393/1/012113

学科分类：工业工程学

来源: IOP

【 摘 要 】

This paper analyzes the needs of the processing industry sector in Montenegro for the establishment of the Industrial Design Laboratory. The analysis was created as a result of the research done for the purpose of preparing the Preliminary feasibility study for the establishment of the "Industrial Design Laboratory", which would operate as a part of the d.o.o. Innovation-entrepreneurship center "Tehnopolis" in Niksic. The study was conducted on the basis of the Public Invitation of the Ministry of Science of Montenegro. The aim of the analysis is to get conclusions about processing industry needs in Montenegro, by using systematization of the parameters, its characteristics and conditions, especially in the field of product development and to identify further activities in order to correctly project directions of development of the Laboratory for industrial design. For the research, the "Delphi method" was used, as a special and recognized way to obtain relevant indicators in the world where it is not possible to reach the precise data, but the solution of the problem should be sought on the basis of estimates.