Modeling and calculation of the powered roller conveyor

10th International Symposium Machine and Industrial Design in Mechanical Engineering

工业技术;机械制造

Miloradovi, N.^1 ; Vujanac, R.^1 ; Mileti, I.^1

University of Kragujevac, Faculty of Engineering, Sestre Janji 6, Kragujevac

34000, Serbia^1

关键词: 3-d cads;    Application of standards;    Autodesk Inventor;    Handling systems;    Modeling and calculations;    Product damage;    Roller conveyors;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/393/1/012037/pdf
DOI  :  10.1088/1757-899X/393/1/012037

学科分类：工业工程学

来源: IOP

【 摘 要 】

Powered roller conveyor is used as a segment of transport handling system within the warehouse. A model of this conveyor was developed using Autodesk Inventor Professional 3D CAD software. Selection of main elements, drive units and accompanying mechanisms was performed. Dimensions and parameters of the most important elements of the design (rollers, frames and drive arrangement) were determined based on previous calculations, partly presented in the paper. The concept of calculations was adopted according to the procedures defined in the standards and recommendations. The goal was for adopted design to be highly configurable, simple to install and maintain. The application of standard components ensures elimination of product damage and reduction of the costs.