Designing a flexible facade lift and development of optimal shape of the column

10th International Symposium Machine and Industrial Design in Mechanical Engineering

工业技术;机械制造

Djelosevic, M.^1

University of Novi Sad, Faculty of Technical Sciences, Trg Dositeja Obradovica 6, Novi Sad

21000, Serbia^1

关键词: Circular hollow section;    Connecting points;    Deformation energy;    Global and local buckling;    Optimal alternative;    Ranking procedures;    Square hollow sections;    Structural analysis softwares;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/393/1/012122/pdf
DOI  :  10.1088/1757-899X/393/1/012122

学科分类：工业工程学

来源: IOP

【 摘 要 】

The procedure of designing the columns of the flexibile facade lift is presented in this paper. Choice the optimal variant of the lattice column was realized using the AHP method. The ranking procedure was conducted for 4 criteria and 5 alternatives. The optimal alternative includes circular hollow section (CHS) and square hollow section (SHS). The column design was carried out for 6 combinations of loads according to ASCE 7-05. The calculation of the strength and stability of the column was carried out using the EN 1993-3 and the structural analysis software (SAP 2000). A column with greater lateral rigidity has a very adverse effect on local stability. A greater number of connecting points increases global, and reduces local stability of the column. Properly designed columns must have a certain degree of elasticity. The loss of stability in the case of overloading must only be manifested by global buckling due to significantly higher deformation energy. The presented analysis examines the interaction of global and local buckling. Conclusions in the form of stability criteria can be implemented in the design process.