RTM technology of woven spacer fabric reinforced sandwich composite panels

2018 International Conference on Advanced Materials, Intelligent Manufacturing and Automation

材料科学;机械制造;运输工程

Jia, Lixia^1 ; Tian, Fei^1 ; Liu, Junmei^1 ; Yan, Ruosi^1 ; Pan, Jian^1

College of Textile and Garments, Hebei University of Science and Technology, Shijiazhuang, China^1

关键词: Composite panels;    Compression properties;    Injection temperature;    Molding process;    Polyester fiber;    Sandwich composite panels;    Shaping process;    Woven spacer fabrics;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/382/3/032057/pdf
DOI  :  10.1088/1757-899X/382/3/032057

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

The polyester fiber was utilized to fabricate the woven spacer fabric on the common loom, and the sandwich panels were produced by resin transfer molding process (RTM). The parameter of RTM molding process was determined. The correct ratio of resin, curing agent and accelerator in RTM process is 100:86:1. The injection temperature is 65°C. Injection time is shorter than 2 hours. Flexure and flatwise compression of composite panels were tested. The experiment result shows: flexure property and flatwise compression property of the RTM composite panels are better than that produced by handle paste shaping process.