会议论文详细信息
4th Annual International Workshop on Materials Science and Engineering | |
A Review on Corrosion Resistant of Cu-Al Joints | |
Huang, Sen^1 ; Long, Weimin^1,2 ; Huang, Bin^3 ; Zhong, Sujuan^1 ; Bao, Li^1 | |
State Key Laboratory of Advanced Brazing Filler Metals and Technology, Zhengzhou Research Institute of Mechanical Engineering, Zhengzhou | |
450052, China^1 | |
School of Materials Science and Engineering, Tsinghua University, Beijing | |
100084, China^2 | |
School of Automation, Northwestern Polytechnical University, Xian | |
710072, China^3 | |
关键词: Alloy compositions; Alloy structures; Chemical compositions; Corrosion formation; Corrosion-resistant; Research orientations; Stress and strain; Surrounding environment; | |
Others : https://iopscience.iop.org/article/10.1088/1757-899X/381/1/012174/pdf DOI : 10.1088/1757-899X/381/1/012174 |
|
来源: IOP | |
![]() |
【 摘 要 】
This paper discussed the profile of research on corrosion resistance of Cu-Al joints. The review indicated that it was difficult to avoid the corrosion formation in the Cu-Al joint due to the heterogeneous chemical composition and structure. Factors influencing the corrosion resistance of Cu-Al joints could be divided into three categories, the first one is the effect of alloy itself (such as alloy composition, mixed impurities, alloy structure, heat treatment, metal surface condition, stress and strain), the second one is the effect of the surrounding environment (such as corrosion medium, temperature and stress) and the last one is the effect of equipment design and process and anti-corrosion measures (such as spray coating). Hence excellent joints with high-corrosion resistance could be ensured if researchers could take a good use of these factors. Finally, suggestions about the further research orientation of Cu-Al corrosion protection was given.【 预 览 】
Files | Size | Format | View |
---|---|---|---|
A Review on Corrosion Resistant of Cu-Al Joints | 138KB | ![]() |