Release of ammonia from conventional power plant fly ash after the introduction of SNCR process

International Conference Building Materials, Products and Technologies

土木建筑工程

Beranová, D.^1 ; Opravil, T.^1 ; Ptáek, P.^1 ; Snop, R.^2

Brno University of Technology, Faculty of Chemistry, Materials Research Centre, Purkyova 464/118, Brno

612 00, Czech Republic^1

EZ Energetické Produkty, S.r.o., Komenského 534, Hostivice

253 01, Czech Republic^2

关键词: Chemical and phase compositions;    Chemical reduction;    Conventional power plants;    Hydrogensulfate;    Mixing conditions;    Selective non-catalytic reduction;    Water vapour;    X ray fluorescence;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/379/1/012031/pdf
DOI  :  10.1088/1757-899X/379/1/012031

学科分类：土木及结构工程学

来源: IOP

【 摘 要 】

The paper deals with a study of various factors affecting the release of ammonia from conventional power plant fly ash after introduction of SNCR (Selective non-catalytic reduction). SNCR is a method of flue gas denitrification based on the chemical reduction of nitrogen oxide into nitrogen and water vapour. Reduction has many by-products, various ammonia salts, which could contaminate fly ash and deteriorate its properties and application. The chemical and phase composition of fly ash was determined by X-Ray Fluorescence and X-Ray Diffraction. To predict the contaminated fly ash behaviour, the samples of fly ash with known ammonia content was prepared by mixing fly ash with exact amount of ammonia hydrogensulfate. Tests were performed on the samples prepared from contaminated fly ash as it was, contaminated fly ash with deionized water and as a mixture of contaminated fly ash, lime, gypsum and water (further stabilizate). Effects of various storage and mixing conditions on prepared samples properties were studied.