Development of aluminum metal foam using blowing agent

International Conference on Mechanical, Materials and Renewable Energy

机械制造;材料科学;能源学

Sharma, S.S.^1 ; Rajpoot, Y.S.^1

Department of Mechanical Engineering, Manipal University, Jaipur

303007, India^1

关键词: Aluminium foam;    Aluminum foam;    Aluminum metal;    High purity;    Manufacturing process;    Molten aluminium;    Production process;    Pure aluminum;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/377/1/012150/pdf
DOI  :  10.1088/1757-899X/377/1/012150

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

This paper describes the complete manufacturing process for production of the aluminium foam with its achieved important physical properties and its uses in various industries. The production process of aluminum metallic foam includes high purity molten aluminium in which a small amount of calcium carbonate powder is continuously faded and stirred thoroughly. The decomposition of calcium carbonate release gases, which are entrapped in high viscous mixture of the molten aluminium and calcium residues and create low density porous aluminium foam as shown in figure no. 7 and figure no. 8. The aluminum foam is collected and cooled in the mold. Afterward foam is removed from the mold and cut to the desired sizes. The foam with low density 848 kg/m3 is obtained and density of which is 0.342 times of pure aluminum.