Investigation of EDM Process parameters for Hybrid Metal Matrix Composites

International Conference on Mechanical, Materials and Renewable Energy

机械制造;材料科学;能源学

Maniyar, Kamalkishor G.^1 ; Ingole, Dilip S.^2

Mechanical Engineering, SGBAU, Amravati (M.S.), India^1

Department of Mechanical Engineering, PRMITR, Badnera (M.S.), India^2

关键词: Electrical discharge machining process;    Hybrid metal matrix composites;    Machining conditions;    Machining process parameters;    Material removal rate;    Process parameters;    Stir casting;    Weight percentages;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/377/1/012204/pdf
DOI  :  10.1088/1757-899X/377/1/012204

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

The goal of present research work is to investigate the Electrical discharge Machining process parameters namely current, pulse on time and combined equal weight percentage of silicon carbide and graphite on material removal rate, tool wear rate and surface roughness of hybrid metal matrix composites. Experimental trails are done by Taguchi's L27 orthogonal array. Signal to noise ratio is used to determine optimal setting of process parameters. Analysis of Variance is utilized to discover the most influential machining process parameters on output responses. This examination have shown results of ideal machining condition which can be utilized to boost material removal rate as well as to limit tool wear rate and surface roughness. Finally results are validated by confirmation Tests.