Design and Analysis of Vertical Pressure Vessel using ASME Code and FEA Technique

International Conference on Advances in Manufacturing, Materials and Energy Engineering 2018

材料科学;能源学

Niranjana, S.J.^1 ; Patel, Smit Vishal^1 ; Dubey, Ankur Kumar^1

Department of Mechanical and Automobile Engineering, Faculty of Engineering, Christ University, 560074, India^1

关键词: ANSYS11;    Creo;    hyper view;    HyperMesh6.1;    Stress concentration factors;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/376/1/012135/pdf
DOI  :  10.1088/1757-899X/376/1/012135

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

In this project we are designing a pressure vessel using ASME section VIII and Division 2, designing a closed container to find the required thickness of the shell, head, nozzle and leg support. Uniform thickness assigned to the entire vessel, Modelling of the pressure vessel is carried out using Pro-e 2.0; meshing is carried out using Hypermesh 6.1. Here we used 2D Quad element for the meshing, Analysis is carried out using ANSYS Software 11 for two different cases, working pressure and Maximum operating pressure, fatigue analysis is carried out, and the result is 106. Finally, theoretical validation is carried out for the entire model, And the results are within the limit.