Preparation and Optimization of Natural Glues Based on Laricio Pine Resin

Euroinvent ICIR 2018

De Luca, P.^1 ; Roberto, B.^2 ; Vuono, D.^2 ; Siciliano, C.^3 ; Nagy, J.B.^2

Dipartimento di Ingegneria Meccanica, Energetica e Gestionale, Italy^1

Dipartimento di Ingegneria per l'Ambiente Ed Il Territorio Ed Ingegneria Chimica, Italy^2

Dipartimento di Farmacia e Scienze della Salute e della Nutrizione, Università della Calabria, Arcavacata di Rende, Rende (Cs)

87036, Italy^3

关键词: Adequate solvents;    Flexural tests;    Fluid-phase;    Fundamental component;    Natural components;    Pine resin;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/374/1/012071/pdf
DOI  :  10.1088/1757-899X/374/1/012071

来源: IOP

【 摘 要 】

The main purpose of this work was to prepare and optimize glues consisting primarily of natural components. The fundamental component was the laricio pine resin to which different additives were added, varying their nature and quantity. The additives used were: charcoal, activated carbon and carbon nanotubes (MWCNTs). The optimization of the systems continued to identify and select suitable solvents, in order to improve dispersion and solubilization of the phases and to obtain glues in the fluid phase at room temperature. The best results were obtained with ethyl alcohol which, moreover, represents a solvent with a limited environmental impact. The evaluation of the adhesive capacity of the glues was carried out by cutting, tensile and flexural tests on prepared wooden specimens. Furthermore, the specimens and the same glue were subjected to thermal cycles and observed by Scanning Electron Microscope (SEM). The carbon nanotubes, used in very low percentages (1%, in a system consisting mainly of natural origin products) in the presence of an adequate solvent, such as ethyl alcohol, make it possible to obtain a glue that is easy to apply, with an excellent adhesive capacity.