Research on Recycling Mixed Wastes Based on Fiberglass and Organic Resins

Euroinvent ICIR 2018

Platon, M.A.^1 ; Stef, M.^1 ; Popa, C.^1 ; Tiuc, A.E.^1 ; Neme, O.^1,2

Technical University, Faculty of Materials Science and Engineering, 103-105 Muncii Avenue, Cluj-Napoca

400641, Romania^1

National Institute for Research and Development in Environmental Protection, 294 Splaiul Independenei, Bucharest

060031, Romania^2

关键词: Board production;    Chemical behavior;    European Parliament;    Innovative technology;    Mixed wastes;    Organic resins;    Physical features;    Rubber granules;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/374/1/012065/pdf
DOI  :  10.1088/1757-899X/374/1/012065

来源: IOP

【 摘 要 】

In recycling, according to principles of Directive 2008/98/EC of the European Parliament and of the Council on waste, research is upheld for achieving innovative technologies for reuse and keep as long it is possible, in economic chain, a waste. The aim of this research is to study and test a new composite material based on fiberglass waste mixed with organic resins with large application in the industry but not limited to this. Fiberglass is a material widely used for reinforcement of composite materials. As waste, fiberglass was less studied for ways to be reused. Filling fiberglass mixed with organic resins as PMMA and epoxy resins possess proper physical features for thermoforming. Three mixes are studied: fiberglass with PMMA, fiberglass with PMMA and rubber granules or sawdust. Samples will be tested for to define the mechanical and chemical behavior to have a complete description of the material. Analyzing the results can be concluded that mixes are suitable for board production, with improved features, compared with equivalent products on the market.