3D finite element analysis of tightening process of bolt and nut connections with pitch difference

2018 International Conference on Material Strength and Applied Mechanics

材料科学;力学

Liu, X.^1 ; Noda, N.-A.^1 ; Sano, Y.^1 ; Huang, Y.T.^1 ; Takase, Y.^1

Mechanical Engineering Department, Kyushu Institute of Technology, 1-1 Sensui-cho, Tobata-ku, Kitakyushu-shi, Fukuoka

804-8550, Japan^1

关键词: 3D-finite element analysis;    Bolt axial force;    Industrial fields;    Machine element;    Pitch differences;    Prevailing torque;    Tightening process;    Tightening torque;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/372/1/012006/pdf
DOI  :  10.1088/1757-899X/372/1/012006

来源: IOP

【 摘 要 】

In a wide industrial field, the bolt-nut joint is unitized as an important machine element and anti-loosening performance is always required. In this paper, the effect of a slight pitch difference between a bolt and nut is studied. Firstly, by varying the pitch difference, the prevailing torque required for the nut rotation, before the nut touches the clamped body, is measured experimentally. Secondly, the tightening torque is determined as a function of the axial force of the bolt after the nut touches the clamped body. The results show that a large value of pitch difference may provide large prevailing torque that causes an anti-loosening effect although a very large pitch difference may deteriorate the bolt axial force under a certain tightening torque. Thirdly, a suitable pitch difference is determined taking into account the anti-loosening and clamping abilities. Furthermore, the chamfered corners at nut ends are considered, and it is found that the 3D finite element analysis with considering the chamfered nut threads has a good agreement with the experimental observation. Finally, the most desirable pitch difference required for improving anti-loosening is proposed.