Material selection criteria for natural fibre composite in automotive component: A review

The Wood and Biofiber International Conference 2017

轻工业生物科学

Noryani, M.^1,2 ; Sapuan, S.M.^1 ; Mastura, M.T.^3 ; Zuhri, M.Y.M.^1 ; Zainudin, E.S.^1

Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, Selangor

808-0196, Malaysia^1

Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, Durian Tunggal, Melaka

76100, Malaysia^2

Faculty of Engineering Technology, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, Durian Tunggal, Melaka

76100, Malaysia^3

关键词: Automotive component;    Automotive component design;    Design specification;    Elongation at break;    Manufacturing process;    Materials selection;    Natural fibre composites;    Natural fibre-reinforced composites;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/368/1/012002/pdf
DOI  :  10.1088/1757-899X/368/1/012002

学科分类：生物科学（综合）

来源: IOP

【 摘 要 】

Emphasizing the green technology in manufacturing process with proper materials selection of natural fibre reinforced composite (NFRC) can save our future generation. There is multiple consideration of the criteria from the reseacher for material selection process since the database of NFRC is not completely available. Product design specification (PDS) of automotive component is studied from past researcher with the summarized of the elements considered. Literature from year 2000 until year 2016 were collected which is focused on related automotive component design. In this study, it is found that the most commonly used elements of PDS of automotive component was consider from the previous researcher were cost, density, tensile strength, Young's modulus and elongation at break. Generally, the mentioned elements are recommended to be considered by other researchers in automotive component design in material selection process.