Study on Unified Reference Source Phase-Check Technology Based on Synchronized Phasor Measurement

2018 3rd Asia Conference on Power and Electrical Engineering

能源学;电工学

Pei, Li^1 ; Hongbo, Li^1 ; Ning, Kong^2 ; Nannan, Gao^1 ; Lin, Niu^1 ; Ying, Pei^1 ; Liangfeng, Guo^1

State Grid of China Technology College, 500 Erhuan Nan Road, Jinan, Shandong, China^1

Heze Electric Power Supply Company of National Power Grid, Heze, Shandong, China^2

关键词: Area power grid;    Electrical equipment;    High-efficiency;    Phase relationships;    Reference source;    Synchronized phasor measurements;    Synchronous sampling;    Technology-based;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/366/1/012059/pdf
DOI  :  10.1088/1757-899X/366/1/012059

来源: IOP

【 摘 要 】

In the power system, the phase-check is a simple but very important work. The newly built, transformed and expanded power plant, transformer substation electrical equipment and power transmission lines before put into operation must be carried out phase-check test, in order to ensure voltage phase sequence and phase correct. At present, there are some limitations of traditional phase-check technology in China. In this paper, we study the method of unified reference source based on synchronized phasor measurement technology. Through the GPS time synchronization signal to realize synchronous sampling of source voltage signal in different regions, by comparing to the phase of a fixed reference source signal in the power network to determine the phase relationship between any two different power points, and thus to complete the work of phase-check. The unified reference source phase-check method based on the synchronized phasor measurement technique is simple, easy to operate, and has high efficiency, which has unique advantages. And wide area power grid phase-check can be realized.