Force of resistance to pipeline pulling in plane and volumetrically curved wells

International Conference "Transport and Storage of Hydrocarbons"

能源学;运输工程;化学工业

Toropov, V.S.^1 ; Toropov, S Yu^1 ; Toropov, E.S.^1

Industrial University of Tyumen, 38 Volodarskogo St., Tyumen

625000, Russia^1

关键词: Buoyancy forces;    Exit angles;    Normal component;    Pulling force;    Resistance force;    Total resistance;    Variable curvature;    Well profile;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/357/1/012017/pdf
DOI  :  10.1088/1757-899X/357/1/012017

来源: IOP

【 摘 要 】

A method has been developed for calculating the component of the pulling force of a pipeline, arising from the well curvature in one or several planes, with the assumption that the pipeline is ballasted by filling with water or otherwise until zero buoyancy in the drilling mud is reached. This paper shows that when calculating this force, one can neglect the effect of sections with zero curvature. In the other case, if buoyancy of the pipeline is other than zero, the resistance force in the curvilinear sections should be calculated taking into account the difference between the normal components of the buoyancy force and weight. In the paper, it is proved that without taking into account resistance forces from the viscosity of the drilling mud, if buoyancy of the pipeline is zero, the total resistance force is independent of the length of the pipe and is determined by the angle equal to the sum of the entry angle and the exit angle of the pipeline to the day surface. For the case of the well curvature in several planes, it is proposed to perform the calculation of such volumetrically curved well by the central angle of the well profile. Analytical dependences are obtained that allow calculating the pulling force for well profiles with a variable curvature radius, i.e. at different angles of deviation between the drill pipes along the well profile.