Selection of optimal conditions for preparation of emulsified fuel fluids

International Conference "Transport and Storage of Hydrocarbons"

能源学;运输工程;化学工业

Ivanov, V.A.^1 ; Berg, V.I.^1 ; Frolov, M.D.^1

Industrial University of Tyumen, 38 Volodarskogo St, Tyumen

625000, Russia^1

关键词: Chemical effect;    Chemical treatments;    Emulsified fuel;    Fuel emulsions;    ITS applications;    Optimal conditions;    Surfactant concentrations;    Total mass;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/357/1/012029/pdf
DOI  :  10.1088/1757-899X/357/1/012029

来源: IOP

【 摘 要 】

The aim of the article is to derive the optimal concept of physical and chemical effects, and its application to the production of water-fuel emulsions. The authors set a research task to attempt to estimate the influence of the surfactant concentration on such indicator as the time before the beginning of emulsion breaking. The analysis, based on experimental data, showed that an increase in the concentration of sodium lauryl sulfate is expedient to a certain point, corresponding to 0.05% of the total mass fraction. The main advantage of the model is a rational combination of methods of physical and chemical treatment used in the production of emulsions.