Application of taguchi method for selection parameter bleaching treatments against mechanical and physical properties of agave cantala fiber

7th AIC‐ICMR on Sciences and Engineering 2017

自然科学;工业技术

Yudhanto, F.^1,2 ; Jamasri^1 ; Rochardjo, Heru S.B.^1

Department of Mechanical and Industrial Engineering, Faculty of Engineering, Universitas Gadjah Mada, Jl. Grafika No.2, Yogyakarta

55281, Indonesia^1

Department of Mechanical Engineering, Universitas Muhammadiyah Yogyakarta, Jl. Lingkar Barat, Tamantirto, Kasihan, Bantul, Yogyakarta

55183, Indonesia^2

关键词: Bleaching process;    Bleaching treatment;    Crystallinity index;    L9 orthogonal arrays;    Mechanical and physical properties;    Selection parameters;    Single fiber;    Wave forms;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/352/1/012002/pdf
DOI  :  10.1088/1757-899X/352/1/012002

来源: IOP

【 摘 要 】

The characterized agave cantala fiber in this research came from Sumenep, Madura, Indonesia was chemically processed using sodium hydroxide (NaOH) and hydrogen peroxide (H2O2) solution. The treatment with both solutions is called bleaching process. Tensile strength test of single fiber was used to get mechanical properties from selecting process of the various parameter are temperature, PH and concentration of H2O2 with an L9 orthogonal array by Taguchi method. The results indicate that PH is most significant parameter influencing the tensile strength followed by temperature and concentration H2O2. The influence of bleaching treatment on tensile strength showed increasing of crystallinity index of fiber by 21%. It showed by lost of hemicellulose and lignin layers of fiber can be seen from waveforms changes of 1735 (C=O), 1627 (OH), 1319 (CH2), 1250 (C-O) by FTIR graph. The photo SEM showed that the bleaching of fibers causes the fibers more roughly and clearly than untreated fibers.