New Silica Magnetite Sorbent: The Influence of Variations of Sodium Silicate Concentrations on Silica Magnetite Character

12th Joint Conference on Chemistry

Azmiyawati, C.^1 ; Pratiwi, P.I.^1 ; Darmawan, A.^1

University of Diponegoro, Indonesia^1

关键词: Acid leaching;    Adsorption capacities;    Amorphous structures;    Gas sorption analyzer;    Silica adsorbent;    Silica coatings;    Sodium silicate;    Surface area;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/349/1/012012/pdf
DOI  :  10.1088/1757-899X/349/1/012012

来源: IOP

【 摘 要 】

The adsorption capacity of an adsorbent is determined by the adsorbent and the adsorbate properties. The character of the adsorbent will play a major role in its ability to adsorb the corresponding adsorbate. Therefore, in this study we looked at the effects of variations of sodium silicate concentrations on the resulting magnetite silica adsorbent properties. The application of silica coating on the magnetite was carried out through a sol-gel process with sodium silicate and HCl precursors. Based on the characterization data obtained, it was found that the silica coating on magnetite can increase the resistance to acid leaching, increase the particle size, but decrease the magnetic properties of the magnetite. Based on Gas Sorption Analyzer (GSA) and X-ray Difraction (XRD) data it can successively be determined that increase in concentration of sodium silicate will increase the surface area and amorphous structure of the Silica Magnetie.