Effect of Dynamic Pressure on the Performance of Thermoacoustic Refrigerator with Aluminium (Al) Resonator

International Conference on Recent Advances in Materials & Manufacturing Technologies

Arya, Bheemsha^1 ; Ramesh Nayak, B.^2 ; Shivakumara, N.V.^1

Department of Mechanical Engineering, BMS College of Engineering, Bengaluru

560019, India^1

Department of Industrial Engineering and Management, BMS College of Engineering, Bengaluru

560019, India^2

关键词: Chlorofluorocarbons (CFCs);    Coefficient of Performance;    COPR;    Drive ratio;    Dynamic pressures;    Stack;    Thermoacoustic refrigeration;    Thermoacoustic refrigerators;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/346/1/012034/pdf
DOI  :  10.1088/1757-899X/346/1/012034

来源: IOP

【 摘 要 】

In practice the refrigerants are being used in the conventional refrigeration system to get the required cooling effect. These refrigerants produce Chlorofluorocarbons (CFCs) and Hydro chlorofluorocarbons (HCFCs) which are highly harmful to the environment, particularly depleting of ozone layers resulting in green house emissions. In order to overcome these effects, the research needs to be focused on the development of an ecofriendly refrigeration system. The thermoacoustic refrigeration system is one among such system where the sound waves are used to compress and expand the gas particles. This study focuses on the effect of dynamic pressure on the thermoacoustic refrigerator made of aluminium with overall length of 748.82 mm, and the entire inner surface of the resonator tube was coated with 2mm thickness of polyurethane to minimize the heat losses to the atmosphere. Experiments were conducted with different stack geometries i.e. parallel plates having 0.119 mm thick with spacing between the plates maintained at 0.358 mm, 1mm diameter pipes, 2mm diameter pipes and 4 mm diameter pipes. Experiments were also conducted with different drive ratios of 0.6%, 1% and 1.6% for a constant dynamic pressure of 2 bar and 10 bar for helium and air as working medium. The results were plotted with the help of graphs, the variation of coefficient of performance (COP) and the relative coefficient of performance (COPR) for the above said conditions were calculated.