Coating hydroxiapatite on stainless steel 316 L by using sago starch as binder with dip-coating method

2nd International Conference on Oleo and Petrochemical Engineering

Fadli, A.^1 ; Akbar, F.^1 ; Prabowo, A.^1 ; Hidayah, P.H.^1

Chemical Engineering Department, Faculty of Engineering, University of Riau, Indonesia^1

关键词: Bioactive properties;    Bone reconstruction;    Calcination conditions;    Corrosion and oxidation;    Hydroxyapatite coating;    Naturally occurring;    Stainless steel 316;    Stainless steel 316L;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/345/1/012036/pdf
DOI  :  10.1088/1757-899X/345/1/012036

来源: IOP

【 摘 要 】

Hydroxyapatite (HA) is a mineral form of naturally occurring apatite calcium with Ca10(PO4)6(OH)2formula. One of the major innovations in the field of bone reconstruction is to apply HA as a surface coating on a mechanically strong implant metal and to improve the stability of bone implants thereby increasing the lifetime of the metal implants. Pure hydroxyapatite has poor mechanical properties so it is necessary to add sago starch as a binder to combine the strength and hardness of metal surfaces with bioactive properties of hydroxyapatite by Dip Coating method. Stainless steel 316L is the most commonly used alloy as an implant for bones and teeth due to its excellent corrosion and oxidation resistance and is easily formed. In this study, hydroxyapatite coatings used fixed variables as hydroxyapatite mass (10 grams), aquades mass (20 grams), dipping time (20 seconds), and calcination conditions (800°C, 1 hour). The variables are sago starch mass (1, 1.25, 1.5 gram) and stirring time (16, 20, 24 hours). The shear strength value is higher in the addition of 1.25, 10, 20, and again in the binder ratio of 1.5; 10; 20. The addition of stirring time causes a decrease in shear strength. The highest shear strength value obtained was 3.07 MPa. The layer attached to the substrate is a hydroxyapatite with a composition of 99.4% as evidenced by the results of XRD analysis.