Application of Response Surface Methodology for characterization of ozone production from Multi-Cylinder Reactor in non-thermal plasma device

International Conference on Innovative Technology, Engineering and Sciences 2018

工业技术;自然科学

See, Tan Lian^1 ; Shah Zulkifli, Ahmad Zulazlan^2 ; Tzeng, Lim Mook^2

Malaysia-Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia (UTM), Kuala Lumpur

54100, Malaysia^1

TNB Research Sdn. Bhd., Selangor Kajang

43000, Malaysia^2

关键词: Atmospheric air;    Dielectric barrier discharge reactors;    Duty-cycle;    Environmental treatment;    Nonthermal plasma;    Ozone production;    Response surface methodology;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/342/1/012087/pdf
DOI  :  10.1088/1757-899X/342/1/012087

来源: IOP

【 摘 要 】

Ozone is a reactant which can be applied for various environmental treatment processes. It can be generated via atmospheric air non-thermal plasmas when sufficient voltages are applied through a combination of electrodes and dielectric materials. In this study, the concentration of ozone generated via two different configurations of multi-cylinder dielectric barrier discharge (DBD) reactor (3 x 40 mm and 10 x 10 mm) was investigated. The influence of the voltage and the duty cycle to the concentration of ozone generated by each configuration was analysed using response surface methodology. Voltage was identified as significant factor to the ozone production process. However, the regressed model was biased towards one of the configuration, leaving the predicted results of another configuration to be out of range.