Design, simulation and analysis a microstrip antenna using PU-EFB substrate

International Conference on Innovative Technology, Engineering and Sciences 2018

工业技术;自然科学

Mahmud, S.N.S.^1 ; Jusoh, M.A.^1 ; Jasim, S.E.^1,2 ; Zamani, A.H.^1 ; Abdullah, M.H.^1

Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang, Gambang Kuantan, Pahang

26300, Malaysia^1

Technical Institute/Al Haweejah, Northern Technical University, Al Haweejah-36007, Kirkuk, Iraq^2

关键词: Antenna radiation efficiency;    HFSS software;    High return loss;    Low-bandwidth;    Micro-strip patch antennas;    Operating frequency;    Sensor applications;    Simulation and analysis;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/342/1/012021/pdf
DOI  :  10.1088/1757-899X/342/1/012021

来源: IOP

【 摘 要 】

A low cost, light weight and easy to fabricate are the most important factor for future antennas. Microstrip patch antennas offer these advantages and suitable for communication and sensor application. This paper presents a design of simple microstrip patch antenna working on operating frequency of 2.4 GHz. The designed process has been carried out using MATLAB and HFSS software by entering 2.3 for the dielectric constant of PU-EFB. The results showed that high return loss, low bandwidth and good antenna radiation efficiency of which are -21.98 dB, 0.28 dB and 97.33%, respectively.