Research on the Automatic Fusion Strategy of Fixed Value Boundary Based on the Weak Coupling Condition of Grid Partition

2017 2nd International Conference on Mechatronics and Electrical Systems

机械制造;无线电电子学

Wang, X.Y.^1,2 ; Dou, J.M.^1,2 ; Shen, H.^1,2 ; Li, J.^3 ; Yang, G.S.^1,2 ; Fan, R.Q.^3 ; Shen, Q.^4

China Electric Power Research Institute, Beijing

100192, China^1

State Key Laboratory for Security and Energy Saving, Beijing

100192, China^2

State Grid Shandong Electric Power Company, Jinan

250001, China^3

State Grid Jinan Power Supply Company, Jinan

250001, China^4

关键词: Actual operation;    Computing platform;    Coupling algorithms;    Fusion algorithms;    Fusion techniques;    Network structures;    Scene description;    Transient stability analysis;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/339/1/012020/pdf
DOI  :  10.1088/1757-899X/339/1/012020

来源: IOP

【 摘 要 】

With the continuous strengthening of power grids, the network structure is becoming more and more complicated. An open and regional data modeling is used to complete the calculation of the protection fixed value based on the local region. At the same time, a high precision, quasi real-time boundary fusion technique is needed to seamlessly integrate the various regions so as to constitute an integrated fault computing platform which can conduct transient stability analysis of covering the whole network with high accuracy and multiple modes, deal with the impact results of non-single fault, interlocking fault and build "the first line of defense" of the power grid. The boundary fusion algorithm in this paper is an automatic fusion algorithm based on the boundary accurate coupling of the networking power grid partition, which takes the actual operation mode for qualification, complete the boundary coupling algorithm of various weak coupling partition based on open-loop mode, improving the fusion efficiency, truly reflecting its transient stability level, and effectively solving the problems of too much data, too many difficulties of partition fusion, and no effective fusion due to mutually exclusive conditions. In this paper, the basic principle of fusion process is introduced firstly, and then the method of boundary fusion customization is introduced by scene description. Finally, an example is given to illustrate the specific algorithm on how it effectively implements the boundary fusion after grid partition and to verify the accuracy and efficiency of the algorithm.