Effect of Bauxite addition on Adhesion Strength and Surface Roughness of Fly ash based Plasma Sprayed Coatings

7th National Conference on Processing and Characterization of Materials

Bhuyan, S.K.^1 ; Samal, S.^1 ; Pattnaik, D.^1 ; Sahu, A.^1 ; Swain, B.^1 ; Thiyagarajan, T.K.^2 ; Mishra, S.C.^1

Metallurgical and Materials Engineering Department, N.I.T. Rourkela, India^1

Laser and Plasma Technology Division, BARC, Mumbai, India^2

关键词: Coal fired thermal power plants;    Mild steel substrates;    Phase composition analysis;    Plasma spray technology;    Plasma-sprayed coatings;    Surface roughness (Ra);    Thermal power plants;    Value added products;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/338/1/012053/pdf
DOI  :  10.1088/1757-899X/338/1/012053

来源: IOP

【 摘 要 】

The environment is being contaminated with advancement of new technology, day by day. One of the primary sources for this contamination is the industrial waste. Industrialization is the prime reason behind the prosperity of any country to meet the materialistic demand. To run the industries, a huge amount of (electric) power is needed and hence need for thermal power plants to serve the purpose. In present scenario, coal fired thermal power plants are set up which generates a huge quantity of Fly ash. Consumption of industrial waste (Fly ash), continually a major concern for human race. In recent years, fly ash is being utilized for various purposes i.e. making bricks, mine reclamation, production of cements etc. The presence of Silica and Alumina in fly ash makes it useful for thermal barrier applications also. The plasma spray technology has the advantage of being able to process any types of metal/ceramic mineral, low-grade-ore minerals etc. to make value-added products and also to deposit ceramics, metals and a combination of these to deposit composite coatings with desired microstructure and required properties on a range of substrate materials. The present work focuses on utilization of fly ash mixing with bauxite (ore mineral) for a high valued application. Fly ash with 10 and 20% bauxite addition is used to deposit plasma spray overlay coatings at different power levels (10-20kW) on aluminum and mild steel substrates. Adhesion strength and surface roughness of the coatings are evaluated. Phase composition analysis of the coatings were done using X-ray diffraction analysis. Surface morphology of the coatings was studied using a scanning electron microscope (SEM). Maximum adhesion strength of 4.924 MPa is obtained for the composition fly ash and bauxite (10%), coated on mild steel at 16kW torch power level. The surface roughness (Ra) of the coatings is found to vary between 10.0102 to 17.2341 micron.