Failure mode effect analysis and fault tree analysis as a combined methodology in risk management

International Conference on Industrial and Systems Engineering 2017

Wessiani, N.A.^1 ; Yoshio, F.^1

Department of Industrial Engineering, Institut Teknologi Sepuluh Nopember, Kampus ITS, Sukolilo-Surabaya

60111, Indonesia^1

关键词: Failure mode effect analysis;    Fault tree analyses (FTA);    Internal risk;    Management methodologies;    Production process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/337/1/012033/pdf
DOI  :  10.1088/1757-899X/337/1/012033

来源: IOP

【 摘 要 】

There have been many studies reported the implementation of Failure Mode Effect Analysis (FMEA) and Fault Tree Analysis (FTA) as a method in risk management. However, most of the studies usually only choose one of these two methods in their risk management methodology. On the other side, combining these two methods will reduce the drawbacks of each methods when implemented separately. This paper aims to combine the methodology of FMEA and FTA in assessing risk. A case study in the metal company will illustrate how this methodology can be implemented. In the case study, this combined methodology will assess the internal risks that occur in the production process. Further, those internal risks should be mitigated based on their level of risks.