The Effects of Substitution of The Natural Sand by Steel Slag in The Properties of Eco-Friendly Concrete with The 1:2:3 Ratio Mixing Method

International Conference on Advanced Materials for Better Future 2017

Rahmawati, A.^1 ; Saputro, I.N.^1

Department of Building Engineering Education, Faculty of Teacher Training and Education, Universitas Sebelas Maret, Indonesia^1

关键词: Coarse aggregates;    Conventional concrete;    Properties of concretes;    Research results;    Steel slag concretes;    Steel slag sands;    Strength of concrete;    Strength ratios;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/333/1/012097/pdf
DOI  :  10.1088/1757-899X/333/1/012097

来源: IOP

【 摘 要 】

This study was motivated by the need for the development of eco-friendly concrete, and the use of large quantities of steel slag as an industrial waste which is generated from the steel manufacturers. This eco-friendly concrete was developed with steel slag as a substitute for natural sand. Properties of concrete which used waste slag as the fine aggregate with the 1 cement: 2 sand : 3 coarse aggregate ratio mixing method were examined. That ratio was in volume. Then a part of natural sand replaced with steel slag sand in six variations percentages that were 0 %, 20 %, 40 %, 60 %, 80 % and 100 %. The compressive strength, tensile strength, and flexural strength of concrete specimens were determined after curing for 28 days. The research results demonstrate that waste steel slag can increase the performance of concrete. The optimal percentage substitution natural sand by steel slag sand reached of slag on the percentage of 20 % which reached strength ratios of steel slag concrete to the strength of conventional concrete with natural sandstone were 1.37 for compressive strength and 1.13 for flexural strength. While the tensile strength reached a higher ratio of concrete with steel slag sand to the concrete with natural sand on the 80% substitution of natural sand with steel slag sand.