A 2×1 Coplanar Monopole Antenna Structure for Wireless RF Energy Harvesting

3rd International Conference on Communication Systems

无线电电子学

Mathur, Monika^1 ; Agarwal, Ankit^1 ; Singh, Ghanshyam^2 ; Bhatnagar, S.K.^1

Electronics and Communication Department, SKIT, Jaipur, India^1

Electronics and Communication Department, MNIT, Jaipur, India^2

关键词: Energy harvesting systems;    Impedance matching circuits;    RF energy harvesting;    RF-DCConverter;    Satellite applications;    Wilkinson power dividers;    Wireless Energy Harvesting;    Wireless rf energy harvesting;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/331/1/012001/pdf
DOI  :  10.1088/1757-899X/331/1/012001

来源: IOP

【 摘 要 】

The objective of this paper is to design an efcient wireless energy harvesting (WEH) system to eliminate the problem to continuous charging of a battery operated electronics devices. Most of the devices are battery operated so charging of a battery time to time is serious issue. This WEH system receives the Radio Frequency (RF) and Microwave frequency signals present in the atmosphere and converting it into DC signal so that it can stores in Capacitor or charges a battery for utilize the power. For this RF energy harvesting purposes 21 antenna array structure of the coplanar monopole antenna is presented. This structure shows the gain of 10.2 dBi and 83% efciency. This structure is designed for resonating on multiple bands (Radio, GSM, ISM, and UWB). It is useful for this application because it covers almost all useful bands in the maximum capturing area. The antenna can be connected directly to an RF-DC converter module and it uses about 60% of the total PCB area. And RF to DC convertor circuit can be implemented in that remaining 40% area on the same substrate so it eliminates the need of port connectors and impedance matching circuit between them. This design is worked in receiving mode only when used for energy harvesting purposes. This may be useful for the biomedical and satellite applications.