Studies to overcome the manufacturing problems in blast furnace tap hole clay of Integrated Steel Plants: Experimental approach

International Conference on Recent Advances in Materials, Mechanical and Civil Engineering

材料科学;机械制造;土木建筑工程

Siva Kumar, R.^1 ; Mohammed, Raffi^2 ; Srinivasa Rao, K.^3

Research and Development Centre, Visakhapatnam Steel Plant, India^1

Department of Metallurgical and Materials Engineering, NIT, Andhra Pradesh, India^2

Department of Metallurgical Engineering, Andhra University, Visakhapatnam, India^3

关键词: Experimental approaches;    Iron making process;    Iron production;    Liquid iron;    Manufacturing process;    Molten iron;    Tap hole clays;    Visakhapatnam;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/330/1/012055/pdf
DOI  :  10.1088/1757-899X/330/1/012055

来源: IOP

【 摘 要 】

Integrated Steel Plants commonly uses Blast Furnace route for iron production which accounts for over 60 % of the world iron output. Blast Furnace runs for ten to twenty years without repairing hearth walls and Tap Hole (TH). Tap hole is an outlet for hot metal produced in a Blast Furnace and run from the shell of the furnace into the interior allowing access to the molten material. Tapping is the term used for drilling a hole through the tap hole which allows the molten iron and slag to flow out. In Iron making process, removal of liquid iron from furnace and sending it for steel making is known as cast house practice. For tapping liquid iron and operating the tap hole requires a special type of clay. Tap hole clay (THC) used to stop the flow of liquid iron and slag from the blast furnace. Present work deals with the study on manufacturing of THC at Visakhapatnam Steel Plant and problems related to manufacturing. Experiments were conducted to solve the identified problems and results are furnished in detail. The findings can improve the manufacturing process and improve the productivity of tap hole clay.