Injection Molding Parameters Calculations by Using Visual Basic (VB) Programming

International Conference on Recent Advances in Materials, Mechanical and Civil Engineering

材料科学;机械制造;土木建筑工程

Tony, B. Jain A. R.^1 ; Karthikeyen, S.^2 ; Alex, B Jeslin A R^1 ; Ali Hasan, Z. Jahid^2

SSN College of Engineering, Kalavakkam, Chennai

603110, India^1

KCG College of Technology, Karapakkam, Chennai

600097, India^2

关键词: Cooling Capacity;    Cooling channels;    Design calculations;    Gear components;    Injection-molding parameters;    Manufacturing industries;    Molding components;    Production sector;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/330/1/012088/pdf
DOI  :  10.1088/1757-899X/330/1/012088

来源: IOP

【 摘 要 】

Now a day's manufacturing industry plays a vital role in production sectors. To fabricate a component lot of design calculation has to be done. There is a chance of human errors occurs during design calculations. The aim of this project is to create a special module using visual basic (VB) programming to calculate injection molding parameters to avoid human errors. To create an injection mold for a spur gear component the following parameters have to be calculated such as Cooling Capacity, Cooling Channel Diameter, and Cooling Channel Length, Runner Length and Runner Diameter, Gate Diameter and Gate Pressure. To calculate the above injection molding parameters a separate module has been created using Visual Basic (VB) Programming to reduce the human errors. The outcome of the module dimensions is the injection molding components such as mold cavity and core design, ejector plate design.