Parametric Method to Define Area of Allowable Configurations while Changing Position of Restricted Zones

International Conference on Mechanical Engineering, Automation and Control Systems 2017

机械制造;无线电电子学;计算机科学

Pritykin, F.N.^1 ; Nefedov, D.I.^1 ; Rogoza, Yu A.^1 ; Zinchenko, Yu V.^1

Omsk State Technical University, Russia^1

关键词: Collision detection;    Geometric analysis;    Joint configuration;    Joint coordinates;    Joint trajectories;    Kinematic surfaces;    Numerical calculation;    Virtual simulations;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/327/4/042088/pdf
DOI  :  10.1088/1757-899X/327/4/042088

学科分类：计算机科学（综合）

来源: IOP

【 摘 要 】

The article presents the findings related to the development of the module for automatic collision detection of the manipulator with restricted zones for virtual motion modeling. It proposes the parametric method for specifying the area of allowable joint configurations. The authors study the cases when restricted zones are specified using the horizontal plane or front-projection planes. The joint coordinate space is specified by rectangular axes in the direction of which the angles defining the displacements in turning pairs are laid off. The authors present the results of modeling which enabled to develop a parametric method for specifying a set of cross-sections defining the shape and position of allowable configurations in different positions of a restricted zone. All joint points that define allowable configurations refer to the indicated sections. The area of allowable configurations is specified analytically by using several kinematic surfaces that limit it. A geometric analysis is developed based on the use of the area of allowable configurations characterizing the position of the manipulator and reported restricted zones. The paper presents numerical calculations related to virtual simulation of the manipulator path performed by the mobile robot Varan when using the developed algorithm and restricted zones. The obtained analytical dependencies allow us to define the area of allowable configurations, which is a knowledge pool to ensure the intelligent control of the manipulator path in a predefined environment. The use of the obtained region to synthesize a joint trajectory makes it possible to correct the manipulator path to foresee and eliminate deadlocks when synthesizing motions along the velocity vector.